Cleaning - Astoria Plus4You Manual De Uso Y Mantenimiento Para El Usuario

All maintenance operations must be carried out
after unplugging the machine from the power
!
supply, closing the water and completely cooling
off the machine.
We recommend the use of suitable protective
gloves.
Checks
MACHINE
Using the machine display, check that the
indicated pump pressure is around 8-9 bar.
Check that the boiler pressure indicated on
the display is consistent with a programming
value.
In case of anomalies, contact the Technical
Support Service.
FILTER HOLDER FILTERS
Check the wear of the filters, if there is damage
to the edges, and if coffee grounds are getting
into the cup. If necessary, replace the filters.
GRINDER-DOSER
Check the dose of the ground coffee, which
should be about 6-7 gr. at a time, and adjust
the amount as necessary.
Check the degree of grinding and modify as
required.
Check the grinders for wear: they should be
replaced if there is too much powder in the
ground coffee.
SOFTENER
Carry out regeneration of the softener (for the
manual softener).
Check that there is salt in the container (for the
softener in the automatic version).
If the problem cannot be resolved, turn the ma-
chine off and contact Technical Service. Do not
!
attempt any sort of repairs. The descaling of the
machine must be carried out by professional tech-
nicians to ensure that such operation does not lead
to release of hazardous materials for food use.
User manual

16.2 Cleaning

For perfect cleaning and efficiency of the appli-
ance, several simple cleaning operations are neces-
sary on the functional parts and accessories as well
as the body panels. The indications given here are
applicable for normal use of the coffee machine. If the
machine is used continuously, then cleaning should
be performed more frequently.
Before cleaning the machine, turn it off the ma-
chine and let it cool off.
Cleaning
CAPPUCCINO MAKER
Clean several times a day as indicated in Para-
graph "Cappuccino", especially if used continu-
X
ously.
FILTERS and FILTER HOLDERS
Clean the filter holders daily by leaving them
immersed in hot water all night so as to allow
greasy coffee deposits to dissolve; afterwards,
rinse off everything with cold water.
Perform the same cleaning weekly for 10 minutes
X
in hot water and the appropriate cleaner.
Failure to clean the filter holders daily will jeop-
ardize the quality of the coffee and the proper
functioning of the filter holder.
Warning: only immerse the cup of the
filter holder. Avoid immersing the handle
in water.
X
X
STEAM NOZZLE - MILK FOAMER -
AUTOSTEAMER
Keep the nozzle clean at all times using a cloth
dampened in lukewarm water.
PERFORATED DISK
and CONTAINMENT
RING
Loosen the screw (A)
and remove the
perforated disk (B) and
containment ring (C) from the delivery group.
Wash with hot water.
XXX
X
X
C
B
X
A
51