Grinders Wear Check; Suggestions On How To Obtain A Good Of Coffee - Astoria Plus4You Manual De Uso Y Mantenimiento Para El Usuario

Once thresh-
old "A" has been
reached, the alarm
message changes
to the following:
If no mainte-
nance operation
is executed, the
message indicat-
ed above remains
until the subsequent threshold "B" alarm is reached:
Once thresh-
old "B" has been
reached, the alarm
message changes
to the following:
If no mainte-
nance operation
is executed, the
message indicat-
ed above remains
until the subsequent threshold "C" alarm is reached:
Once thresh-
old "C" has been
reached, the alarm
message changes
to the following:
The system also displays the installation date of
the machine (or the date of the last intervention)
with the date for required maintenance.
Two weeks prior to reaching the programmed
threshold, the fol-
TOTAL CYCLES :
lowing message
appears on the
display:
Once the date
TOTAL CYCLES :
of required assis-
tance is reached,
the following mes-
sage appears on
the display:
i
For alarm programming, contact the technical
assistance.
User manual
PLANNED SERVICE -A-
LIMIT REACHED
PLEASE CALL SERVICE
PLANNED SERVICE -B-
REMAIN CYCLES 1000
PLEASE CALL SERVICE
PLANNED SERVICE -B-
LIMIT REACHED
PLEASE CALL SERVICE
PLANNED SERVICE -C-
REMAIN CYCLES 1000
PLEASE CALL SERVICE
PLANNED SERVICE -C-
LIMIT REACHED
PLEASE CALL SERVICE
WWWWW
REMAIN 15 DAY
PLEASE CALL SERVICE
WWWWW
LIMIT REACHED
PLEASE CALL SERVICE

16.4 Grinders wear check

If enabled, this feature displays a message to
warn the user when it is necessary to replace the
coffee grinder blades.
The appears when the amount in kg of coffee
used reaches the programmed limit.
The message will remain on the display and blink
10 seconds ever y
minute in the selec-
tion standby phase or
in the programming
standby phase.
The alarm for reached/exceeded thresholds does
not prevent the machine from functioning.
The count can be reset at any time (also before
the alarm is engaged) by a technician.
For the programming, contact the technical as-
sistance.
!
The system operates only if the machine is paired
with a single grinder.
17
Suggestions on how to
obtain a good cup of coffee
To obtain high-quality coffee, it is important for
the hardness of the water used to not exceed 4-5°f
(French degrees). If the water hardness exceeds
these values, it is advisable to use a water softener.
Avoid using a water softener if the water hardness
is less than 4 °f.
If the taste of chlorine in the water is particularly
strong, a special filter should be installed.
0,7 Bar Press 3,5
8:30 14-MAY-2010
Humidity 38% P 85%
REPLACEMENT BLADES
53