Smart Connect; Rain Sensor Setup - Toro EVOLUTION AG Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Sensors
Smart Connect Setup
®
e
EVOLUTION
AG
controller is capable of communicating with Toro approved wireless sensors and devices. In order to wirelessly
communicate with these devices, Smart Connect (A-EVO-SC) must be installed in your system. Once a Smart Connect is installed,
® AG controller will automatically synchronize with the device.
EVOLUTION
Display the Smart Connect ID and Reset
– While in the ADVANCED menu, use the Up
Step 1
Step 2
– Use the Up
or Down

SMART CONNECT

ID
14033
RESET TO FACTORY
DEFAULTS?
YES
e Smart Connect ID is displayed at the top of the screen.
Step 3
– To reset Smart Connect, press Up
e Sensors function allows you to assign a rain, weather, and soil sensors to each of the schedules. Schedules with a sensor assigned will not
water when the sensor is activated.

Rain Sensor Setup

®
e
EVOLUTION
AG
controller will stop all scheduled watering if the rain sensor is activated.
Step 1
– While in the ADVANCED menu, use the Up
Step 2
– Use the Up
or Down
Step 3
– Use the Left
or Right
Step 4
– Use the Up
or Down
rain sensor is activated,
disable the sensor for that schedule.
SENSORS
A
B
RAIN
WEATHER
SOIL 1
SOIL 2
Use the Right
arrow or press SELECT
RAIN SENSOR
DRYOUT DAYS
OFF
CURRENT STATE IS DRY
Step 5
– Select DRYOUT DAYS. Press SELECT
– Use the Up
or Down
Step 6
sensor is detected to be dry.
or Down
arrows to select SMART CONNECT, then press SELECT
or Down
to select YES, then press SELECT
or Down
arrows to select RAIN, then press SELECT
arrows to select the schedule.
arrows to place a check mark under the desired schedules to assign the rain sensor. When the
®
EVOLUTION
AG
will prevent schedules from operating. Replace the check mark with a dash to
Ca
to access the rain sensor setup screen.
or Right
arrows to set a dryout of 1-14 days or OFF.
arrows to select SENSORS, then press SELECT
arrows to select SENSORS, then press SELECT
.
arrows to navigate to the parameter.
e dryout day is the waiting period after the rain
.
.
.
.
21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido