Weather Sensor Setup - Toro EVOLUTION AG Manual Del Usuario

Weather Sensor Setup

®
e EVOLUTION AG controller will stop all scheduled watering if the weather sensor senses rain or freezing temperatures.
sensor also adjusts watering accordingly by monitoring air temperature and sunlight radiation, as well as historic weather data of your area
for the last 40 years.
Step 1 – While in the ADVANCED menu, use the Up
Step 2 – Use the Up or Down
Step 3 – Use the Left or Right
Step 4 – Use the Up or Down
the Weather sensor is activated (rain or freezing temperatures),
Replace the check mark with a dash to disable the sensor for that schedule.
SENSORS
A B
RAIN
WEATHER
SOIL 1
SOIL 2
Use the Right arrow or press SELECT
CURRENT ADJUST - Displays the watering adjustment that is placed on the schedule. Watering
is increased or decreased in percentage accordingly depending on the measured air temperature and
sunlight radiation, as well as historical weather data.
LOW LIMIT - e lowest percentage that watering will be adjusted. Use the Up
arrows to adjust as desired.
TEMPERATURE - Displays the measured air temperature at the weather sensor location.
RAIN STATUS - Displays the monitored status of the rain sensor on the weather sensor system.
FREEZE OFF AT - You can set the temperature when the controller will determine freezing and prevent scheduled watering
from operating. Use the Up
DRYOUT DAYS -
the desired dryout days.
WATER ADJUST - Increase or decrease watering globally in addition to the adjustment that the weather sensor has placed.
Use the Up or Down
UPDATE TIME - Select a time when the
weather sensor's data. Use the Up
AVERAGE % DAYS -
used to make the necessary adjustment to the schedules. Use the Up
want the controller to calculate the data average.
ID - Displays the weather sensor identi cation number.
MY LOCATION - Set your location to acquire the proper weather history data. You can choose to use your Zip Code or
location coordinates (Longitude and Latitude). Select TYPE and use the Up
LONG/LAT. Press SELECT
coordinates. Select CONTINUE, then press SELECT
MY LOCATION
TYPE ZIP CODE
ZIP CODE 92502
CONTINUE
SIGNAL STRENGTH - Displays the communication signal strength between the weather sensor and the controller.
BATTERY LEVEL - Displays the battery condition of the weather sensor.
22
or Down
arrows to select WEATHER, then press SELECT
arrows to select the schedule.
arrows to place a check mark under the desired schedules to assign the Weather sensor. When
Ca
to access the weather sensor setup screen.
or Down arrows to adjust the temperature limit to determine the freezing point.
e waiting period after the rain sensor is detected to be dry. Use the Up
arrows to adjust the percentage as necessary.
EVOLUTION
or Down arrows to adjust the time.
is is the number of days that the controller will average the weather data.
. Use the Up or Down
MY LOCATION
TYPE LONG/LAT
LATITUDE +00.000
LONGITUDE +000.000
arrows to select SENSORS, then press SELECT
.
®
EVOLUTION AG will prevent schedules from operating.
or Down
®
AG controller communicates with the weather sensor to update all
or Down arrows to set the number of days you
or Down
arrows to adjust the ZIP CODE or Longitude and Latitude
when nished.
e weather
.
WEATHER SENSOR
CURRENT ADJUST -38%
LOW LIMIT -50%
TEMPERATURE 0 O F
RAIN STATUS DRY
FREEZE OFF AT 31 O F
DRYOUT DAYS 03
WATER ADJUST +5%
UPDATE TIME 12:00AM
AVERAGE % DAYS 5
ID 107260
MY LOCATION
SIGNAL STRENGTH --
BATTERY LEVEL GOOD
or Down arrows to set
e average data is then
arrows to ZIP CODE or