Save To Usb; Preferences; Speci Cations - Toro EVOLUTION AG Manual Del Usuario

Save to USB

Save to USB is used to save all the schedules that are programmed in the controller so it can be reloaded if accidentally erased.
USB function is also helpful when loading multiple controllers with the same schedule programs.
Note: Although many USB ash drives may function well with the EVOLUTION
are recommended:
• USB Version 2.0 Compliant
• 1–8 GB Memory Size (Smaller memory size will perform faster.)
• FAT32 File System with 1 Logical Partition
– Plug your USB Flash drive into the EVOLUTION
Step 1
See Figure 2 on page 2.
Step 2 – Press the HELP/SETUP button.
Step 3 – Use the Up or Down
HELP/SETUP
ALERTS
CONTACT TORO
SET TIME/DATE
LOAD FROM USB
SAVE TO USB
Step 4 – Use the Up or Down
SAVE TO USB
ARE YOU SURE?
e EVOLUTION
"EVOLUTIONMMDDHHMM.evo" (MM = Month, DD = Day, HH = Hour and MM = Minute).

Preferences

Accessing the Preferences Menu
Step 1 – Press the HELP/SETUP button.
Step 2 – Use the Up or Down
PREFERENCES
LANGUAGE ENGLISH
CONTRAST
CLOCK 12 HOUR
DATE FORMAT MM/DD/YY
BEGIN WEEK SUNDAY
Set Language
You can set the user interface to display in English (default), Spanish, French, German, Italian or Portuguese.
Step 1 – While in the PREFERENCES menu, use the Up
– Use the Up or Down
Step 2
Set Display Contrast
Step 1 – While in the PREFERENCES menu, use the Up
Step 2 – Use the Up or Down
negative (–) setting will decrease the contrast. Once you nd the desired contrast, press SELECT
Set Clock Format (12-Hour/24-Hour)
– While in the PREFERENCES menu, use the Up
Step 1
Step 2 – Use the Up or Down
28
®
AG controller's USB port located at the back of the control panel.
arrows to navigate to SAVE TO USB. Press SELECT
arrow to select YES from the con rmation window.
YES
®
AG controller will automatically save the schedules in the USB drive under the name format
arrows to navigate to PREFERENCES. Press SELECT
PREFERENCES
TEMPERATURE O F
00 SOUND ON
LENGTH UNIT INCHES
VOLUME UNIT GPM
BACK LIGHT ON
arrows to navigate to your preferred language. Press SELECT
arrows to your preferred display contrast. Positive (+) setting will increase the contrast and
arrows to select 12-Hour (default) or 24-Hour format. Press SELECT
®
AG controller, the following USB speci cations
or Down arrows to navigate to LANGUAGE. Press SELECT
or Down arrows to navigate to CONTRAST. Press SELECT
or Down arrows to navigate to CLOCK. Press SELECT
e Save to
.
.
.
.
.
.
.
.