Zummo Z10 Manual Del Usuario página 29

 Field 3. Number of oranges per serving.
The same as in the first access level.
 Field 5. Serving price.
The same as in the first access level.
 Field 6. Type of coin box.
Press S1 to pass to field 6 and the screen 6 0 will appear. This means that the coin box to
be installed is Executive. If you press S2 again, it will change to 6 1, which means that the
machine will communicate with an MDB coin box.
 Field 7. Stopping position the cups. (Scheme 1 No. 8)
After having used the machine for a while, it is likely that the cups in the squeezing unit will
not stop at upright position, and lean slightly inwards.
To ensure the cups stop vertically, press switch S2 until you lower the number that initially
appeared one or two units. So, when modifying this value, the cups will stop a Little forward
or a Little backwards.
 Field t. Operating temperature
Press S1 to enter field "t" it will appear t12º on the display. This means that inside the
machine there will be a temperature between 6 ºC and 12 ºC. Press S2 to modify the
temperature from 10 ºC to 50 ºC.
 Field 8. Duration of the automatic washing.
Entering field 8 you can select the how many seconds will last the automatic washing from 7
to 20 seconds.
 Field 9. Enable Sale Button
Entering field 9 you can set sale button (only those versions where the button is installed)
There are 3 options available:
9__0: the button is disabled
9__1: the machine will operate after having completed the credit and only when the button
is pushed
9__2: the machine will operate once the button is pushed (no need to insert any credit).
Fields A, b, c, d, e.

Fields A, b, c, d, e are used only when a MDB Notes Reader has been installed. The five
fields are used to set the value of the notes.
In order to set the value of each note, please remember that you have to use the Coin
Operator multiplier (value of the base unit given by your Coin Operator). In case your MDB
Notes Reader has its own multiplier, please disregard it.
Example:
US $ Coin Readers normally have as base unit (multiplier) the number 5 (= 5 cents coin).
But the US $ MDB Notes Readers use as base unit (multiplier) the number 1 (= 1 US
Dollar).
To set the value of the 1 US $ and 5 $ US notes in the Notes Reader:
1 $ = 100 c (cents)
1 $ =
5 $ =
Note: In case you wish the machine to work only with your MDB Notes Reader (without
Coins Reader), please ask the factory.
ERASE ALL SET VALUES: By entering field 9 and pressing S7, all the values set in the
machine will be erased.
DOOR SWITCH: When you open the door, a safety switch cuts the communication to the
electronic circuit board of the machine. To simulate the operation of the machine with the door
open, pull out the door catch and check whether there is any communication with the control
panel.
TAKE SPECIAL CARE WITH MOVING PARTS SUCH AS THE LOADER, THE ROLLERS,
THE BLADE AND THE FILTER CLEANER.
100 c c
5 c per base unit
500 c c
5 c per base unit
=
20 ( b.u ) base units
=
100 ( b.u ) base units
29