Pictograms And Plates On The Generating Sets And What They Mean - SDMO VX 200/4 H-C Manual De Uso

1. Preface
2. General description
3. Preparation before starting
4. Using the generator set
5. Safety features (if fitted, see specifications table)
6. Maintenance schedule
7. Maintenance procedures
1. Preface
1.1. Recommendations
Thank you for buying one of our generating sets. We recommend that you read this manual carefully and follow the safety and maintenance
advice and user instructions for your generating set very closely.
The information contained in this manual is taken from technical data available at the time of print. In the intention of permanently
improving the quality of our products, this information may be amended without warning.

1.2. Pictograms and plates on the generating sets and what they mean

Danger
Earth
2 - Warning: emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
A = Generating set model
B = Generating set output
C = Voltage
D = Amperage
E = Current frequency
F = Power factor
1.3. Instructions and safety regulations
Do not run the generating set without having put back the protective covers and closed the access doors.
Never take the protective covers off or open the access doors if the generating set is running.
Danger
1.3.1 Warnings
You are likely to encounter several warning symbols in this manual.
This symbol indicates a definite risk to the health and life of people. Not following this instruction may seriously affect
the health of people or prove fatal.
Danger
This symbol draws attention to the potential risk to the health and life of people. Not following this instruction may
seriously affect the health of people or prove fatal.
Warning
Warning: risk of electric shock
Danger, risk of burns
1
1 - Important: refer to the documentation accompanying the generating set.
3 - Stop the motor before filling with fuel.
Example of an identification plate
Contents
8. Storing the generating set
9. Fault finding
10. Generating set specifications
11. Welding specifications
12. Cable sizes
13. Welding cable sizes
14. EC Declaration of conformity
2 3
Warning: the generating set is
supplied without oil. Always check
the oil level before starting the
generating set.
G = Protection rating
H = Generating set noise output
I = Generating set earth
J = Reference Standard
K = Serial number