Programming The Controller; Preparing To Program The Controller - Rain Bird ESP-MC Serie Manual De Operación

Programming the Controller

Using the keys and dial on the controller's faceplate, you can set up the controller to operate automatically. You
can also run the controller manually without making changes in the programs you have set.
This chapter will guide you through the use of the controller's keys and dial and will give you step-by-step
instructions for setting up the four programs to suit your needs.

Preparing to Program the Controller

The controller comes from the factory without a pre-set default program. The following table presents a summary
of the controller's default program settings:
Progr. Station Water
# Time
A All 0 Min
Before you begin programming, it is a good idea to chart your watering schedule on a piece of paper, taking into
account the schedule for all stations and how often you want to repeat the schedule. A blank schedule is provided
for you on pages 32-33.
Start 1 2
Time (MON) (TUES)
8:00A on on
Custom Cycle
3 4 5
(WED) (THU) (FRI) (SAT)
on on on
6 7
(SUN)
on on
13