Rain Bird ESP-MC Serie Manual De Operación página 20

Programming the Controller,
To set a cyclical cycle,
1. If the program you want is not displayed, press
PGM until it is.
2. Rotate the dial to CYCLICAL.
The display shows the number of days remaining
and the number of days in the cycle. The number
of days in the cycle is flashing, indicating that it is
ready to be set. If it is not flashing, press MAN
START/ADV until the number of days in the
cycle is flashing.
The display shows USED if the program is active
and using a different cycle mode. If this is the
case, you can override the previous setting.
3. Press ON.
The cyclical display appears and the cyclical light
on the faceplate illuminates.
4. Use the arrow keys to set the number of days in
the cycle.
For example, if you set a 3-day cycle, the controller
skips two days and waters on the third.
5. Press MAN START/ADV
side of the display.
The number of days remaining in the cycle
flashes, indicating that it is ready to be set.
16
continued
to toggle to the left
6. Use the arrow keys to set the number of days
remaining before the next watering day. This tells
the controller where today is in the cycle you
have just set. For example, if DAYS REMAINING
is set to "0," watering will occur today. If DAYS
REMAINING is set to "1," watering will occur
tomorrow.
7. Return the dial to AUTO.
The controller returns to the time of day display
and waters on the days you have specified.
To set an odd or even cycle,
1. If the program you want is not displayed, press
PGM until it is.
2. Rotate the dial to ODD DAYS or EVEN DAYS.
The display shows the program and ODD or
EVEN.
The display shows USED if the program is active
and using a different cycle mode. If this is the
case, you can override the previous setting.
3. Press ON.
The display shows either ODD or EVEN and the
corresponding light on the faceplate illuminates.
4. Return the dial to AUTO.
The controller returns to the time of day display
and waters on the days you have specified.
Note: The 31st day of the month defaults to ON, so
if you do not want to water on the 31st, you must set
that day to OFF. See page 21 for more information.