Setting Event Day Off; Setting A Delay Between Stations - Rain Bird ESP-MC Serie Manual De Operación

Programming the Controller,

Setting Event Day Off

The Event Day Off feature allows you to omit
temporarily a calendar day or days from the
watering cycle. After a calendar day passes, that day
returns to the default setting. The default for all days
is ON. If the 31st is set to OFF, it remains off until it is
set to ON. This is to accommodate odd day watering
cycles which do not allow watering on the 31st.
To set a day off,
1. Rotate the dial to EVENT DAY OFF.
The display shows the day of the month on the
left and the ON or OFF setting on the right. The
day of the month is flashing, indicating that it is
ready to be set.
2. Use the arrow keys to set the day of the month
you wish to change.
3. Press MAN START/ADV
side of the display.
The ON/OFF setting flashes, indicating that it is
ready to be set.
4. If you are setting the day to on, press ON; if you
are setting the day to off, press OFF.
5. Return the dial to AUTO.
When a day off arrives, the display shows NON
(for non-watering day) and the controller does
not allow watering.
continued
to toggle to the right

Setting a Delay between Stations

The controller allows you to set a delay between
stations for each program. The delay can be from 0
seconds (default) to nine hours.
To set a delay between stations,
1. Rotate the dial to TEST/STATION DELAY
2. Press both L/ON and M/OFF
simultaneously.
The display shows DELAY.
3. Press the PGM key to select the program to which
the delay is to be applied.
4. Use the L/ON and the M/OFF
select the delay time you desire. The delay time
can be set in:
• one-second increments, between one second
and five minutes
• one-minute increments, between five min-
utes and nine hours
.
keys
keys to
21