Fig. 1
2
5
2
4
3
When using the equipment
Check if rotation direction is correct.
Only shred wood and plant waste of proper
dimensions.
Wear proper clothes and safety equipment.
62
Fixing the Tractor Lower Hitch
1
Operation Instructions
Check TDP minimum and maximum length
required to couple the machine/ tractor.
In the event of problems, get in touch with
TRAPP nearest Technical Assistant. After
installing, secure cardan safety protections,
both on the tractor and on the machine, with
the chain that comes with the cardan.
Make sure pivots are free. If TDP shaft is
equipped with other safety devices, such
as torque limit or a clutch, install them
accordingly.
These operations must be made on adequate
floor only. Stop tractor, disconnect from TDP
and use parking brakes. If necessary, lift the
machine from the ground. For safety reasons,
place it on a support to prevent accidents.
70
Fixing the lower hitch of the tractor (5) using
screws (1), flat washer (2), lock washer (3)
and nut (4) on the machine structure.
Make sure there is enough fuel in the tractor
to prevent an unplanned stop.
Only use shredder in safe conditions, well lit
and ventilated areas.
Push small material with long pieces of
wood.
www.trapp.com.br