GUTMANN Alma Instrucciones De Uso página 31

Reinstate the metal filter after the cleaning.
By models using the "Perimeter Extraction"
method the pane has to be brought
afterwards in its original position. Therefore
please press the pane with both hands
upwards to a certain extent (lock in of the
pane).
Activated carbon filter
For activated carbon filters fitted in GUT-
MANN extractor hoods (C Version), please
read the separate operating instructions
provided!
Exchange of the lighting
Replace faulty lights through new ones
immediately.
Please cut the connection between the
extractor hood and the power supply
system!
The lightings remain hot for some time.
Please wait therefore for some time till the
lightings have cooled off.
After cooling-off the glass cover is to be
removed with a small screwdriver. Then the
lighting can be taken out. Please avoid any
skin contact with the luminous means. Af-
ter the exchange press the glass pane
lightly to a certain extent (lock in of the pane).
Lighting
Standard model with LED lighting! Chan-
ging of the LED lighting only possible by
the service department!
Dysfunctions
Please note: if an error indication appears,
please power off the hood. After 10 sec
switch on the hood again.
Please refer to our customer service if
- the extractor hood produces too much
undefined noise and the control of the
exhaust air path reveils no faults;
- the supercharger works faulty;
- the circuit operates invalid.
Please indicate your type of extractor hood
and the series number. These informations
are mentioned on the type sheet which is
situated inside the hood on the filter.
en
31