Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Also, at the bottom line on the Main Screen will display Salt concentration if
Conductivity Kit is connected. It can measure 0 to 10g/L range, our optimum
operating range for the cell is from 4g/L to 8 g/L. Below this level of salt in the
swimming pool a warning message will come up on the Status Bar. "Too much
salt" will be displayed if probe readings are above 8g/L.
4.1.2.7 Relays status
On the central section, relays status will be shown according to a colour code.
ON: Square lights up green.
OFF: Square is off.
AUTO: Square has green board line.

4.1.3 Relays Menu

In this menu, four potential free relays can be manual controlled or
programmed for the day.
It allows four different programming cycles. The user needs to set up a start
time and end time. Clock must be configured correctly before starts
programming relays.
Manual control is available by using ON/OFF options.
98 / 120
Manual EVOLINK v.5

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido