Tabla De Contenido - ALFA 8703 Manual De Instrucciones

PREPARATION
Names of Parts ....................................................... 8
Attaching the Waste Chip Box .............................. 10
Storing the Accessory Box .................................... 10
Standard Accessories ........................................... 10
Storing the Needle Threader ................................ 10
Connecting the Machine to the Power Supply.......... 12
Controlling Sewing Speed..................................... 12
For Your Safety ............................................... 12
How to turn the Handwheel .................................. 14
Opening and Closing the Side Cover ................... 14
Opening and Closing the Looper Cover ............... 14
The Position of Thread Guide Bar ........................ 16
Attaching the Spool Holder Cap and Net .................. 16
Changing Needle .................................................. 18
How to use the Needle Holder .............................. 18
Raising or Lowering the Presser Foot .................. 20
Removing the Presser Foot .................................. 20
Attaching the Presser Foot ................................... 20
Adjustment of Foot Pressure ................................ 20
Adjustment of Stitch Length .................................. 22
Adjustment of Differential Feed Ratio ................... 22
How to Adjust .................................................. 22
To Deactivate the Upper Knife .............................. 24
To Activate the Upper Knife .................................. 24
Adjustment of Cutting Width ................................. 26
Adjustment of Needle Plate Setting Knob............. 28
Setting the Lower Looper Pre-Tension Setting
Slider and Changeable Thread Guide .................. 30
Changing to two-thread serging ............................ 32
Threading the Machine .................................. 34~54
• Threading the Lower Looper ......................... 38
• Threading the Upper Looper ......................... 44
• How to thread only the Upper Looper ........... 46
• Threading the Needle on the Right ............... 48
• How to Use the Needle Threader ................. 50
• Threading the Needle on the Left ................. 52
TEST STITCHING
Starting Sewing ..................................................... 56
Finishing Sewing ................................................... 56
Sewing Continuously ............................................ 56
How to Use Guide Lines ....................................... 56
Securing Ends ....................................................... 58
Thread Tension (4 threads) ........................... 60~62
Threading the Machine (3 threads) ....................... 64
Thread Tension (3 threads) .................................. 66
Threading the Machine (2 threads) ....................... 68
Thread Tension (2 threads) ........................... 70~72
Thread and Needle Chart ..................................... 74
TABLE OF CONTENTS
ROLLED HEMMING, PICOT EDGING AND
NARROW HEMMING
Machine Setting and Thread, Fabric and
Range of the Tension Dial .................................... 76
Thread Tension ..................................................... 80
For Better Results ................................................. 82
DECORATIVE OVEREDGING
Thread and Fabric ................................................. 84
Machine Setting .................................................... 84
GATHERING
Thread and Fabric ................................................. 84
Machine Setting .................................................... 84
PIN TUCKING
Thread and Fabric ................................................. 86
Machine Setting .................................................... 86
Sewing .................................................................. 86
CARE OF YOUR MACHINE
Replacing the Upper Knife .................................... 88
Cleaning Upper Knife Area ................................... 88
Replacing the Light Bulb ....................................... 90
Cleaning the Feed Dog ......................................... 90
Oiling the Machine ................................................ 92
Carrying the Machine ............................................ 92
Troubleshooting .................................................... 94
OPTIONAL PARTS ........................................ 98
5