Adjustment Of Volume And Monitor Parameters; Selecting The Operation Mode: Tv / Spectrum Analyzer / Measurements; Channel Tuning / Frequency Tuning - Promax US TV EXPLORER II Manual De Uso

USER'S MANUAL. US TV EXPLORER
[37] USB Connector
It enables the communication with a PC, and to download dataloggers and
channel plans.
5.2

Adjustment of Volume and Monitor Parameters

Repeatedly pressing the
CONTRAST, BRIGHTNESS, SATURATION and HUE control menus. On activation of
a menu for a specific parameter the screen displays a horizontal bar whose length is
proportional to the parameter level, to modify this value simply turn the rotary selector
[1]. To exit the menu and validate the new value press the rotary selector
5.3 Selecting the Operation Mode: TV / Spectrum Analyzer /
Measurements
The US TV EXPLORER
Analyzer and Measurements. To switch from TV operation mode to the Spectrum
Analyzer press [13] key. To switch to the Measurements mode press
In TV operation mode the demodulated television signal is shown on-screen; this
is the default operation mode, various functions can be selected, as shown in the
following paragraphs.
In Spectrum Analyzer operation mode the screen displays the spectrum of the
active band (terrestrial or satellite). The span and the reference level.
In Measurement mode the screen shows the available measurements according
to the type of signal selected.
5.4

Channel Tuning / Frequency Tuning

Pressing [24] key the US TV EXPLORER
channel tuning and back again.
In channel tuning mode turning the rotary selector
channels defined in the active channels table. When turning it clockwise frequency
increases while turning it anticlockwise frequency decreases.
In frequency tuning mode there are two ways of tuning:
11/2013
II
[3] key sequentially activates the VOLUME,
II has three basic operation modes: TV, Spectrum
II switches from frequency tuning to
[1].
[12] key.
[1] sequentially tunes the
Page 29