Description Of The Inputs And Outputs; Rf Input; Usb Port; Scart (Din En 50049) - Promax US TV EXPLORER II Manual De Uso

USER'S MANUAL. US TV EXPLORER

6 DESCRIPTION OF THE INPUTS AND OUTPUTS

6.1

RF input

The RF input is through the RF
signal level should never exceed more than 130 dBμV.
6.2

USB port

The US TV EXPLORER
communicating with a PC, and to downloading dataloggers and channel plans through
the software NetUpdate.
Figure 62.- Rear panel USB connector. External view.
6.3

Scart (DIN EN 50049)

Also known as PERITEL connector (in conformity with standard NF-C92250). The
signals in this connector are the following:
PIN number SIGNAL
1 Right channel audio output
2 Right channel audio input
3 Left channel audio output
4 Audio grounding
5 Blue grounding (B)
6 Left channel audio input
7 Blue output (B)
8 Switching voltage
9 Green grounding (G)
10 Digital bus interface
11 Green output (G)
12 Digital bus interface
13 Red grounding (R)
14 Digital bus reserved
15 Red output (R)
16 Blanked signal
17 Composite video grounding
18 Blanked return
19 Composite video output
20 Video input
21 Connector shield grounding
11/2013
II
[30] connector at the side panel. The peak
II incorporates an USB port, which enables
Figure 63.- Scart socket (external view).
Table 6.- Description of the Scart.
CHARACTERISTICS
(not connected)
(not connected)
(not connected)
(not connected)
(not connected)
Page 83