Tabla de contenido
Publicidad
System Realtime Message
Timing Clock
Status
F8H
* This message will be received if the Clock Source parameter (Edit:System MIDI:Clock
Source) is MIDI.
Active Sensing
Status
FEH
* When Active Sensing is received, the unit will begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds 420 ms,
the same processing will be carried out as when All Sounds Off, All Notes Off and Reset
All Controllers are received, and message interval monitoring will be halted.
System Exclusive Message
Status
Data byte
F0H
iiH, ddH, ......,eeH F7H
F0H:
System Exclusive Message status
ii = ID number:
an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland's manufacturer ID is 41H.
ID numbers 7EH and 7FH are extensions of the MIDI standard;
Universal Non-realtime Messages (7EH) and Universal Realtime
Messages (7FH).
dd,...,ee = data:
00H - 7FH (0 - 127)
F7H:
EOX (End Of Exclusive)
Of the System Exclusive messages received by this device, the Universal Non-realtime
messages and the Universal Realtime messages and the Data Request (RQ1) messages and
the Data Set (DT1) messages will be set automatically.
Universal Non-realtime System Exclusive Messages
Identity Request Message
Status
Data byte
F0H
7EH, dev, 06H, 01H F7H
Byte
Explanation
F0H
Exclusive status
7EH
ID number (Universal Non-realtime Message)
dev
Device ID (dev: 00H - 1FH (1 - 32), the initial value is 10H (17).)
06H
Sub ID#1 (General Information)
01H
Sub ID#2 (Identity Request)
F7H
EOX (End Of Exclusive)
* When this message is received, Identity Reply message (p. 108) will be transmitted.
Universal Realtime System Exclusive Messages
Master Fine Tuning
Status
Data byte
F0H
7FH, 7FH, 04H, 03H, llH, mmHF7H
Byte
Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
04H
Sub ID#1 (Device Control)
03H
Sub ID#2 (Master Fine Tuning)
llH
Master Fine Tuning LSB
mmH
Master Fine Tuning MSB
F7H
EOX (End Of Exclusive)
mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])
Status
Status
Status
Master Coarse Tuning
Status
Data byte
F0H
7FH, 7FH, 04H, 04H, llH, mmH
Byte
Explanation
F0H
Exclusive status
7FH
ID number (universal realtime message)
7FH
Device ID (Broadcast)
04H
Sub ID#1 (Device Control)
04H
Sub ID#2 (Master Coarse Tuning)
llH
Master Coarse Tuning LSB
mmH
Master Coarse Tuning MSB
F7H
EOX (End Of Exclusive)
ll:
ignored (processed as 00H)
mm: 28H - 40H - 58H (-24 - 0 - +24 [semitones])
* Not received by the Organ Part.
Data Transmission
This instrument can use exclusive messages to exchange many varieties of internal settings
with other devices.
The model ID of the exclusive messages used by this instrument is 00H 5FH.
Data Request 1 RQ1 (11H)
This message requests the other device to transmit data. The address and size indicate the
type and amount of data that is requested.
When a Data Request message is received, if the device is in a state in which it is able to
transmit data, and if the address and size are appropriate, the requested data is transmitted
as a Data Set 1 (DT1) message. If the conditions are not met, nothing is transmitted.
Status
Data byte
F0H
41H, dev, 00H, 5FH, 11H, aaH, bbH,
ccH, ddH, ssH, ttH, uuH, vvH, sum
Byte
Remarks
F0H
Exclusive status
41H
ID number (Roland)
dev
Device ID (dev: 10H - 1FH, 7FH)
00H
Model ID #1 (VR-760)
5FH
Model ID #2 (VR-760)
11H
Command ID (RQ1)
aaH
Address MSB
bbH
Address
ccH
Address
ddH
Address LSB
ssH
Size MSB
ttH
Size
uuH
Size
vvH
Size LSB
sum
Checksum
F7H
EOX (End Of Exclusive)
* The size of data that can be transmitted at one time is fixed for each type of data. And
data requests must be made with a fixed starting address and size. Refer to the address
and size given in "Parameter Address Map" (p. 109).
* For the checksum, refer to p. 112.
MIDI Implementado
Status
F7H
Status
F7H
105
Publicidad
Tabla de contenido
