Installation Declaration - RK Rose+Krieger RKPowerlift M Instrucciones De Montaje

1. Installation declaration

1.1 Installation declaration
As set out in Machine Directive 2006/42/EC, Appx. II, 1.B for incomplete machines
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
Description and identification of the partly completed machine.
Product / manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machine Directive 2006/42/EC are applied and met:
1.1.5.; 1.2.4.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.8.; 4.1.2.3.; 4.1.3.; 4.3.2.
Moreover, we declare that the special technical documents have been created according to An-
nex VII Part B.
The manufacturer declares explicitly that the incomplete machine meets all the relevant provi-
sions of the following EC directives:
2004/108/CE:2004-12-15
2011/65/EC
26
The person in the community that is authorised to compile the rele-
vant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
see maker's plate on the front page of these installation instructions
Electro-motorised extracting and retracting of the inner profile for su-
itability of a linear movement
(Electromagnetic Compatibility) Directive 2004/108/EC by the European
Parliament and Council of 15th December 2004 for alignment of the
statutory regulations of Member States governing electromagnetic
compatibility and repealing Directive 89/336/EEC.
Directive of the European Parliament and of the Council of 8th June 2011
on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.