Operating Principle; Symbols In The Reader Unit Display - MIETHKE 75100000 Instrucciones De Uso

GB | INSTRUCTIONS FOR USE

OPERATING PRINCIPLE

The telemetric system serves to measure
CSF pressure readings whose relative, time-
dependent changes and characteristics may
allow conclusions as to the function of an
implanted ventricular drainage system. Diag-
nostic methods can be used to initiate a pres-
sure change in the shunt system, which can
then be interpreted. The M.scio's measured

SYMBOLS IN THE READER UNIT DISPLAY

<Info>
<Menu>
<Fast measurement>
<Up arrow>
<Down arrow>
<Exit menu>
<OK>
<Start>
<Stop>
<Delete>
<Star>
<Editing diagram>
<Zoom menu>
<Cursor menu>
<Pressure axis val-
ues>
<Exit cursor menu>
<Exit zoom menu>
<Right arrow>
<Left arrow>
<On>
<Off>
<Confirmation>
<Zoom in>
<Zoom out>
<Mute>
32
data can be read out and displayed with the
Reader Unit. Measured data are automatically
stored on the SD card and can thus be evalu-
ated at a later stage. The relative behaviour of
the CSF pressure in the shunt system can pro-
vide information about its function. This per-
mits the non-invasive detection and localisa-
tion of an occlusion within the shunt system
and also of a mechanical loss of function.
For displaying additional information or starting with the
information menu
For starting with the selection menu
Fast measurement can be started without a further
selection
Upward navigation of cursor
Downward navigation of cursor
For quitting the current menu
Activates or confirms the selected function
Starts measurement
Stops the current measurement
For deleting a saved measurement in the
[Data management] menu
For placing a marker during a [Continuous measure-
ment]
For opening the diagram processing menu
For activating the zoom function
For activating the cursor function
For adjusting the display of min. and max. values of the
pressure axis
For returning to the diagram processing menu
For returning to the diagram processing menu
Navigate forward
Navigate backward
On
Off
Confirm
For zooming into the display of a sequence in the [Data
management] menu
For zooming out of the display of a sequence in the
[Data management] menu
For deactivating the acoustic signal
Reader Unit Set