Data Management | Display Of Measured Data - MIETHKE 75100000 Instrucciones De Uso

GB | INSTRUCTIONS FOR USE
press the <Up arrow> and <Down arrow> to
select the [Fast measurement] menu.
The following is displayed on the screen:
Press the <OK> button to select the [Fast
measurement].
Press the <Start> button to start the Fast mea-
surement.
During fast measurement, the following is dis-
played on the screen:
Press the <Stop> button to stop the measure-
ment. For an explanation of the symbols for
reception quality: see section on "Continuous
measurement".
DATA MANAGEMENT | DISPLAY OF
MEASURED DATA
In the start screen, press the <Menu> button
to display the following submenu:
The <Up arrow> and <Down arrow> buttons
can be used to select the [Data management]
menu, which is confirmed with the <OK> but-
ton.
Measured data are listed chronologically
(from the start of measurement) and shown as
follows:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired file, which is
confirmed with the <OK> button.
Measured data files are labelled as follows:
Symbol Explanation
Single measurement
Continuous measurement
Fast measurement
An hour glass is shown when loading the data
for a contiouous or fast measurement and the
loading time displayed in seconds.
38
Single measurement
Press the <Delete> button to delete the mea-
surement file.
Deletion must be confirmed by pressing
the <Confirmation> button. Press the <Exit
menu> button to return to the above view.
Press this button again to return to the selec-
tion menu.
Continuous measurement
Reader Unit Set