Settings - MIETHKE 75100000 Instrucciones De Uso

GB | INSTRUCTIONS FOR USE

SETTINGS

Press the <Menu> button in the start screen
to open the following submenu:
Press the <Up arrow> and <Down arrow> but-
tons to select the [Settings] menu.
Press the <OK> button to open the [Set-
tings] menu. The following is displayed on the
screen:
Date/Time
Press the <OK> button to open the [Date/
Time] menu. The following information is dis-
played on the screen:
Press the <Right arrow> button to change
the cursor position. Use the <Up arrow> and
<Down arrow> buttons to change the values
at the cursor position.
Modified values are saved immediately.
Units
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the
[Units] menu.
Press the <OK> button to open the <Units>
menu. The following is displayed on the
screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired unit, which
is confirmed with the <OK> button.
Measurement interval
These settings only function in the continuous
measurement mode.
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Mea-
surement interval] menu.
Press the <OK> button to open the [Measure-
ment interval] menu.
The following information is displayed on the
screen:
The <Down arrow> and <Up arrow> buttons
can be used to select the desired measure-
ment interval, which is confirmed with the
<OK> button. Possible settings range from
1-300 s. The available memory space on the
SD card is also shown.
40
Hide graph
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Hide
graph] menu.
Press the <OK> button to open the [Hide
graph] menu. The following is displayed on the
screen:
[Display graph during continuous measure-
ment] can be selected or deselected.
Language
In the [Settings] menu, press the <Down
arrow> and <Up arrow> buttons to select the
[Language] menu.
Press the <OK> button to open the [Lan-
guage] menu. The following information is dis-
played on the screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired language,
which is confirmed with the <OK> button.
Volume
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Vol-
ume] menu.
Press the <OK> button to open the [Volume]
menu. The following information is displayed
on the screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired volume,
which is confirmed with the <OK> button.
Available settings are 1-5. When setting the
volume, a corresponding acoustic signal is
emitted.
NOTE
The setting determines the volume of
acoustic alerts. Exception: Error alerts are
generally emitted at volume level 5.
Standby mode
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the
[Standby mode] menu.
Press the <OK> button to open the [Standby
mode] menu. The following information is dis-
played on the screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired time after
Reader Unit Set