Preparing The Appliance For Operation - Unold 68511 Instrucciones De Uso

this can give rise to the risk of a fire or
short circuit.
24. Never cover the breadmaker with
a towel or any other material. Heat
and steam must escape freely. A fire
can be caused if the breadmaker is
covered by, or comes into contact with,
combustible material, e.g. curtains.
25. Before a certain type of bread is
baked overnight, you should always
try out the recipe first to confirm the
correct mixing ratio of the individual
CAUTION:
The appliance becomes very hot during operation and maintains the heat during
some time after disconnection!
Never open the housing of the appliance. This can result in electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if repairs are carried out by unauthorized
third parties.

PREPARING THE APPLIANCE FOR OPERATION

1. When unpacking the appliance, check to make sure
that all parts are present and undamaged.
2. Before using the appliance the first time, remove
all packaging materials and all loose parts from the
inside. Keep packaging materials away from children -
danger of suffocation!
3. Before the first use, rinse out the Backmeister
pan with warm water and mild dishwashing liquid and
clean the kneader.
4. Wipe the outside of the appliance with a well wrung-
out damp cloth. Never immerse the appliance in water.
5. Dry all parts thoroughly. Insert the baking pan in the
appliance.
6. Now plug the appliance into the electrical outlet.
The appliance is ready for operation and can be pro-
grammed.
48
Copyright UNOLD AG | www.unold.de
ingredients, that the dough is not too
stiff or thin, or that the quantity is not
excessive and overflow.
26. Check the appliance, the wall socket
and the lead cable regularly for wear
or damage. In case the lead cable or
other parts appear damaged, please
send the appliance or the base to
our after sales service for inspection
and repair. Unauthorised repairs can
constitute serious risks for the user
and void the warranty.
7. Since smoke can occur the first time the appliance
heats up, we recommend that you allow the bread-
maker to run through the BACKPULVER program once
with an empty baking pan (without kneader) to remove
any residue on the heating elements.
8. Allow the appliance to cool for a while.
baking 9. Afterwards you can start baking bread.
®