Verlinde Stagemaker SL10 Manual Del Propietário página 90

4. Pull out the control board.
5. When the control board is a few
centimeters out, unplug the brake cable (1)
from the control board.
6. Remove the end cover on the brake side.
For more information, see chapter Removing and installing the hoist covers.
7. Pull the brake cable carefully out on the
brake side.
The brake cable is led through the hoist
frame from the brake side to the motor
side. Pay attention to how the brake
cable is led through the hoist frame.
NOTA
When you have installed the new brake,
you must lead the brake cable again
from the brake side back to the motor
side.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
7 MAINTENANCE
3/2020