Verlinde Stagemaker SL10 Manual Del Propietário página 98

11. Assemble the new double brake.
Pay attention to the orientation of the
NOTA
brake lining.
12. Install the new brake on the shaft.
1.
2.
3.
There may be two extra screws on the
brake. The screws are used during
transportation to keep the brake
NOTA
components together. Remove these
two screws when you have installed the
new double brake.
The top brake is the main brake, and the
NOTA
bottom brake is the secondary brake.
13. Lead the brake cables through the hoist
frame. Pull the brake cables carefully out
on the motor side.
Este documento y la información contenida en éste son de propiedad exclusiva de Verlinde S.A.S., constituyen un
secreto comercial no público, confidencial del propietario, y no puede ser ni reproducido, divulgado a terceros,
modificado ni empleado de ninguna otra manera sin el permiso expreso escrito de Verlinde S.A.S. Copyright 2020 ©
Verlinde S.A.S. Todos los derechos reservados.
Secure the fixation with the three
screws. Pre-tighten the screws by
hand.
Tighten the screws with a tool.
If the brake has two more screws,
remove the screws.
7 MAINTENANCE
3/2020