Care Instructions - medi circaid juxtalite Instrucciones De Uso

Ocultar thumbs Ver también para circaid juxtalite:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 12
Material composition
circaid compression garment
• Nylon 56%
• Polyurethane 40%
• Elastane 4%
For all other components, please
refer to the inserts included with
each item.
This garment does not contain
latex.

Care instructions

The garment can be machine
washed using a gentle cycle and
dried on a low heat setting. If
doing so, it is recommended that
you place the garment in a pillow
case to aid in keeping the Velcro
tab material lint-free and to
protect other clothing from
getting damaged.
To extend the life of the
garment, hand wash and drip
dry.
Machine wash warm
Do not bleach
Tumble dry, low heat
Do not iron
Do not dry clean
Do not wring
Wearing recommendation
Always ensure that the correct
prescribed pressure range is
being applied.
Slightly loosen the bands of the
garment for night-time wear.
Each vertical BPS line on the
bands may be at a different
location on the leg depending on
the size and shape of the leg.
They do not need to be aligned
down the front center of the leg
or in any other specific location
on the leg.
If experiencing any pain, or
discomfort, reduce the
compression (mmHg) applied or
remove device. Inform your
clinician of your action.
When bands are placed correctly
they should slightly overlap,
leaving no space between bands.
Do not tuck bands. The Velcro
tabs should never touch the skin!
Donning instructions
Step 1: Slide the compressive
undersock onto the leg. Ensure
that there are no wrinkles in the
undersleeve.
Step 2: Align the garment just
above the ankle bone and below
the knee crease. The black side of
the material should face the skin.
Unroll the top two bands and
loosely secure them to the
outside of the garment to anchor
the legging in place. This enables
you to easily raise or lower the
garment for correct positioning.
Note:
The bottom most band can be
identified by the care label.
Step 3: Unroll the bottom two
bands and secure the bottom
most band to the outside of the
legging to a firm and comfortable
compression level.
Step 4: While holding the second
band, detach the next band.
Secure the second band and
continue this process with the
other bands, going up the leg.
Step 5: The garment should lay
flat and wrinkle free against the
leg. Adjust each band to a firm
and comfortable compression
English

Publicidad

Tabla de contenido
loading

Tabla de contenido