Description Of Parts Of The Machine - Sandri Garden SG 1225/25 CS Manual De Instrucciones

PEtROL CHAiN SAW FOR tREE SERViCE USER MANUAL
B1 - tHROttLE LAtCH (see fig.1
item 8) avoids the throttle lever from
being accidentally operated.
tHROttLE LEVER (fig.1 item 9).
DANGER: Be aware that the cut-
ting chain will continue to turn for
some time after the throttle lever is
released.
B2 – StOP SWitCH (fig.1 item 11)
when the lever is lowered [
fig.27] the engine is stopped.
B3 - SAFEtY CHAiN BRAKE The
chain saw is fitted with a safety chain
Fig.27
brake (fig.1 item 6) which locks the
chain in position (in the event of a
kickback) in a fraction of a second.
B4 - CHAiN LAtCH PiN (Fig.1
item 1). This device prevents the
chain from being thrown off in case
of breakage (or if the chain comes
off the guide bar groove) during its
operation.
Before each use, check that all
safety devices are fully opera-
3. DESCRiPtiON OF MACHiNE
PARtS
1)
"0" -
2)
3)
StOP
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
tional.
if not, do not use the chain saw and
contact an approved service centre
to have it repaired.
DESCRiPtiON Fig.1
Chain lock latch pin
Chain
Chain guide bar
Guide bar guard
Spike
Hand front guard / Safety chain brake
lever
Right hand top handle
Throttle lever latch
Throttle lever
Left hand front handle
Engine stop switch [StOP]
Fuel flow adjustment screws
Fuel tank cap
Chain oil tank cap
Starting cable handle
Guide bar tightening nuts
Chain tensioner screw
Chain tensioner tooth
Chain brake cover
Starter
Air filter cover
Exhaust silencer
Air filter cover knob
Support cord hook
Choke/throttle advance knob
Fuel primer
Drive sprocked
Chain brake cover knob
GB
53