Sandri Garden SG 1225/25 CS Manual De Instrucciones página 56

GB
PEtROL CHAiN SAW FOR tREE SERViCE USER MANUAL
1) Place the chain saw on a stable surface.
- Check that the area around the guide bar and
the chain is free from any object.
2) Rise the "i" lever (Fig.31 part.1).
Fig.31
3) Pull the air knob down (Fig.32 part.1) "CHO-
KE"
.
1
4) Fully press (4/5) down the fuel primer (fig. 1
part 33).
5) Do not operate the throttle lever.
6) Lock the chain saw in position as shown in
fig.34.
Firmly hold the chain saw handle with your right
hand (fig.34 - 1) and rest your right knee on the
filter box (fig.34 - 2).
56
Fig.33
1
Fig.34
Fig.32
– Make sure the area around the bar and the chain
is free of any objects.
7) Give the starter cord handle a strong pull, until
the first coughs from the engine (normally not
more than 4/5 times) fig. 34-3.
AttENtiON to the possibility of the
chain moving.
8) Fully press down the air knob (choke) (fig. 35),
so that the "tHROttLE ADVANCE" - StARt
remains engaged.
Do not operate the throttle lever.
9) Continue to pull the starter cord until the engine
starts.
1
2
3