Transport Securing; Rigging - Futurelight PHS-1200E Pro-Head-Spot Manual Del Usuario

Transport securing

The PHS-1200E comes with locked transport securings in order to avoid damages.
Please note: All transport securing must be unlocked before operating the device!
TILT-securing:
Turn the two stop levers at the projector head from Lock to Unlock. Now, the projector head can be freely
moved in the Y-direction.
PAN-securing:
Turn the stop levers at the bottom of the projector arm from Lock to Unlock. Now, the projector head can be
freely moved in the X-direction.
Before transporting the device, please turn all stop levers from Unlock to Lock.

Rigging

Please consider the EN 60598-2-17 and the respective national norms during the
installation! The installation must only be carried out by an authorized dealer!
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
Slot-in gobo-system for exchanging gobos without tools!
Inserting/Exchanging gobos as described above.
Please note!
DANGER TO LIFE!
45/130 00026924.DOC; Version 1.6