Reset Function; Effect Adjust; Users Mode Set; Edit Program - Futurelight PHS-1200E Pro-Head-Spot Manual Del Usuario

Adjust fan speed
With this function you can adjust the speed of the fan.
Display settings
Display close time
With this function you can shut off the LED display after 2 to 59 minutes. Turn the encoder in order to select
the desired shut off time.
Display intensity
With this function, you can adjust the display-intensity from 50 % to 99 %. Turn the encoder in order to select
the desired intensity.
Initial effect
With this function, you can adjust with which value the respective channels will start.
Wireless DMX
From factory, this projector is prepared for wireless data transmission (W-DMX). If you wish to de-activate W-
DMX control, you can select the function "De-activate WDMX" by turning the encoder. With the function
"Rest", you can log out the projector from the wireless sender.

Reset function

With this function you can reset the device via the Control Board. You can select the different Reset-
functions by turning the encoder.
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.

Effect Adjust

Test function of each channel
With this function you can test each channel on its (correct) function.
Lamp adjustment
With this function, you can adjust the lamp more easily. All effects will be cancelled, the shutter opens and
the dimmer intensity will be set to 100 %. With the individual functions, you can focus the light on a flat
surface (wall) and perform the fine lamp adjustment.
Calibrate Values
With this function, you can calibrate and adjust the effect wheels to their correct positions. The password for
this function is „050".

Users mode set

User mode
With this function, you can create user defined channel orders.
Preset User mode
With this function, you can adjust the Preset user defined channel order.

Edit program

Select program for auto program
With this function, you can select the program for the Program Run.
Edit program
With this function, you can edit the internal programs.
61/130 00026924.DOC; Version 1.6