Futurelight PHS-1200E Pro-Head-Spot Manual Del Usuario página 60

Run if no DMX
With this function, you can set different modes if there is no DMX-signal.
• Select "Close, Hold, Auto or Music if no DMX" by turning the encoder.
• Press the enter-button, the display shows "ON" or "OFF".
• Turn the encoder to select "ON" if you wish to enable this function or "OFF" if you don't.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Close if no DMX
With this function, you can close the shutter and set the device to center position if there is no DMX-signal.
This mode equals the settings Auto if no DMX = OFF and Music if no DMX = OFF.
Hold if no DMX
With this function, the device remains in the last received DMX-program if there is no DMX-signal.
Auto run if no DMX
With the function "Auto run if no DMX", you can set the device to auto run if there is no DMX-signal.
Music control if no DMX
With the function "Music control if no DMX", you can set the device to sound-controlled program-run if
there is no DMX-signal.
Battery charger
With this function, the rechargeable battery in the Control Board can be charged. Please note that continued
recharging shortens the battery life substantially. This is why we recommend to charge the battery only when
needed. Please set this option to ON for charging the battery.
PAN Reverse
With this function you can reverse the Pan-movement.
TILT Reverse
With this function you can reverse the Tilt-movement.
Fine resolution
With this function you can switch the device from 16 bit to 8 bit resolution.
• Select "Fine resolution" by turning the encoder.
• Press the Enter-button, the display shows "ON" or "OFF".
• Turn the encoder to select "ON" in order to set 16 bit, or "OFF" in order to set 8 bit. The channels PAN Fine
and TILT Fine will be disabled.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
PAN degree
With this function you can select the PAN-degree.
• Select "PAN degree" by turning the encoder.
• Press the Enter-button, the display shows "630".
• Turn the encoder to select the desired degree between "630" and "540".
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
Automatic PAN/TILT calibration
With this function you can calibrate the PAN/TILT movement to the correct starting position.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of 4 different modes.
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
• Select "Mic sensitivity" by turning the encoder.
• Press the Enter-button, the display shows "M-70".
• Turn the encoder to select the desired sensitivity.
• Press the Enter-button to confirm.
• Press the Mode/Esc-button in order to return to the main menu.
60/130 00026924.DOC; Version 1.6