Ega Master 79621 Manual De Instrucciones página 41

SAFETY INSTRUCTIONS FOR PREVENTION OF NOISE HAZARDS
Always wear hearing protection (EN 352) when working nearby – or at
the running pneumatic axial fan! – This refers to the operator, as well as to any
other person within the vicinity of the machine. Observe the instructions of the
employer and of the professional association.
High noise levels during operation can cause permanent hearing problems
such as tinnitus (ringing, buzzing, whistling or humming in the ears), hardness of
hearing or even deafness.
SAFETY INSTRUCTIONS FOR PREVENTION OF VIBRATION HAZARDS
Vibrations can cause damages to the pneumatic axial fan.
. Fix the pneumatic axial fan according to the description in the operation instruction, in order to
avoid unusually strong vibrations.
. Instantly stop the pneumatic axial fan, when noticing strong vibrations.
SAFETY INSTRUCTIONS FOR PREVENTION OF DUST AND FUME HAZARDS
Wear respiratory protection.
Use respiratory protection as instructed by your employer and as required by
occupational health and safety regulations.
Potentially generated or disturbed dust and fumes in the working environment
or from using the machine can cause ill health (e.g. cancer, birth defects, asthma
and/ or dermatitis).
•
appropriate measures.
•
of dusts and fumes, which can cause a potentially explosive atmosphere.
SAFETY INSTRUCTIONS FOR PREVENTION OF PROJECTILE HAZARDS
Wear impact-resistant safety goggles - This refers to the operator, as well as
for the persons within the vicinity of the machine. Assess and determine the grade
of protection required depending on the individual case. The risks to others should
also be assessed at this time.
On overhead work, wear a safety helmet - If a work piece, accessories,
inserted tools, or the tool itself breaks, there is danger from high velocity
projectiles.
• Before using the machine check all parts for damages.
• Replace damaged parts immediately.
• When working on brittle material make sure that you are protected against harmful splinters.
Carry out risk assessment regarding dust and fume hazards and implement
When assembling/operating the pneumatic axial fan avoid the generation
41