Ega Master 79621 Manual De Instrucciones página 42

SAFETY INSTRUCTIONS FOR PREVENTION OF ACCESSORY HAZARDS
Only use machine tools, accessories and consumables, which are recommended by the
manufacturer. Make sure choosing the correct size and the correct type. Only use accessories,
which are in proper condition and do not touch them during operation.
it is secure. Never hang the machine onto the supply line.
the machine tool or an accessory.
hot or sharp. Wear protective gloves!
protection, adapted to the work place requirements.
hazards, only use accessories, respectively devices, which are ATEX approved
and specified. Use low-sparking accessories.
SAFETY INSTRUCTIONS FOR PREVENTION OF TRANSPORT HAZARDS
Damage of the machine!
transportation.
protective shoes!
42
WARNING – Injury due to carelessness.
ATTENTION – If the machine is fixed to suspension equipment make sure that
• Separate the machine form any external energy source before changing
• Avoid direct contact with the machine tool during and after use as it can be
Defective/ inappropriate gloves can lead to injury. Only wear proper hand
WARNING – Explosion hazard!
When operating pneumatic impact wrenches in areas exposed to explosion
CAUTION – Improper Transport, danger of life due to parts falling down!
• Never carry the machine at the supply line.
ATTENTION – Separate the machine form any external energy source before
Check that the machine is undamaged and in proper condition. Wear worker's