Safety Devices - Ega Master 79621 Manual De Instrucciones

cause serious or fatal injury.

Safety devices

. Prevent rotating parts (shafts, impeller, etc.) from accidential contact by installing appropriate
safety devices (see accessories).
. Design safety devices in such a way that they prevent objects from being sucked in or from
falling in.
. If safety devices were disassembled during the installation, re-assemble them directly after
installation.
danger of contact with the impeller owing to the way the fan is installed, then it is
necessary to fit protective grills.
of objects (IP20 acc. to DIN EN 60529). The user has to find corresponding
protection in order to ensure a safe operation! Additionally, the axial fan must be
earthed.
have to be evaluated within the overall security concept of the construction.
For all work on the pneumatic axial fan,
during assembly, maintenance and repair, mind the constant gap between impeller and stationary
housing.
SAFETY INSTRUCTIONS FOR PREVENTION OF ENTANGLEMENT HAZARDS
Rotating shafts and impellers
Clothes or hair can be entangled in rotating shafts or in impellers.
long hair or gloves can get caught up in the machine tool or accessories and thus
cause severe injuries (lack of breath by throttling, abrasions, skin injuries and/ or
cuts and lacerations).
are forbidden, respectively.
40
DANGER – Risk of explosion due to increased ambient temperature!
Potentially explosive gas mixtures in conjunction with hot and moving parts may
. Observe ambient temperature!
WARNING – Risk of injury!
The pneumatic axial fans are delivered without inlet guards. If there is a
DANGER – Explosion hazard!
ATEX fans of category 2G and 3G have to be protected against any ingress
CAUTION – Risk of injury!
The suitability of protection devices and their fixtures to the pneumatic axial fan
CAUTION – Loose clothing, personal jewellery (e.g. necklace), scarves/ ties,
Wear suitable, close fitting work clothing!
Wear a hair net, if you have long hair.
When handling the machine, jewellery, necklaces, etc. have to be removed or
Do not remove protection devices during operation!