10. ASSEMBLY INSTRUCTIONS - HOB:
1. Remove the furniture drawers or remove the front of the kitchen unit.
2 Check base cut-out for dimensions and flatness and adjust if necessary.
3. Unscrew the handle and outlet nozzle of the NIVEL.
4. Insert the NIVEL hob extractor. Make sure that the seal is placed
properly. Observe and compensate for height differences.
Here the highest caution is required - danger of breakage !
2mm
5. Align the hob, fill the joint (e.g. Novasil®
or Ottoseal®) and smooth.
EN
45