KPS CAT III Manual De Instrucciones página 18

8
1
2
3
4
1 Active store function: store the measureing data to memory
2 Active read function, to view the data store in memory; change cursor position
1. in dcv, acv, continuty mode to view the max value, min value, avg value, upper limited value, lower limited value,
relative value
3
2. in insulation mode to view max value, min value, avg value, upper limited value, lower limited value, preset timer,
DAR, PI
4 Confirm Button
5 Active the timer function
6 Active rel function(in dcv, acv, continuity mode); change cursour position
7 Active compare function
8 Active insulation test
Select one test output voltage for insulation test .
9
10 Active hold function(in DCV, ACV, Continuity)or lock function(Insulation)
11 Back Light on/Off, when the light turn on, after 10s the meter auto turn off light
9
7
6 10
HOLD/LOCK
5 11
.
09
OFF Turn off the meter power
DCV DC Voltage: 0.1V~1000V
ACV AC Voltage: 0.1V~750V
Ohm and continuity: 0.01 ~200.0
Insulation Test 0.01M ~10.0G , Test output Voltage 50V(default)、100V、250V、500V、1000V, the test
Insulation
output volatage have selected will be saved .
V(HI) Input/output positive terminal
COM Common terminal except Inuslation measure
LO Common terminal in Inuslation measure
10