Care Instructions - Eschenbach Powerlux Manual De Instrucciones

Setting Up
1. Remove the device from the packaging.
2. Open the battery compartment e on the rear panel of the device. For this
press on the area with the two small bars and slide the battery compartment
cover r away from the device.
3. According to the positioning diagram in the battery compartment e place
3 × 1.5 V Batteries, Type Mignon, size AA, into the compartment e.
4. Close the battery compartment e.
Using powerlux
1. move powerlux with the lens q over the text that is to be magnified.
2. Powerlux has two SMD high performance LEDs for even illuminating of the
reading area. To switch on the built-in LED lighting please press the button w.
After approx. 30 minutes the lighting switches off automatically. If, after this
time, you want to continue using the lighting press the button w again to
switch the lighting back on.
3. After approx. 30 minutes the lighting switches off automatically. As a result of
this, unnecessary depletion of the batteries will be avoided if you forget to
switch powerlux off after use. If you use powerlux for less than 30 minutes you
can switch the lighting off by pressing the button w.

Care Instructions

Clean the housing with a moist cloth. Clean the lens q with a soft, lint-free cloth
(e.g. glasses cleaning cloth). In case of heavy soiling (e.g. fingerprints), clean the
lens q carefully with a damp cloth.
Do not use any soap solutions that contain softening agents, alcohol-based
solvents or abrasive cleansers! These could destroy the lens q.
7