Pfaff 1050 SRP Instrucciones De Servicio Y Lista Depizas página 6

GB
1 Selecting and altering parameters
.03
● Press and hold key PE and TE simultaneously.
● Switch on the machine.
● Press the Parameter input key (LED on).
● By pressing +/- on the P key select the desired group, e.g. "200".
● By pressing +/- on the S key select the desired parameter, e.g. "250".
● Set the desired value (e.g. clearance under the presser foot) by pressing +/- (L key).
● Save the input by ending the parameter input (LED off).
6
100
200
250