STARFRIT 024604 Instrucciones De Uso página 18

1. Press START button select the cooking function. As temperature increases and
pressure builds, the animated rolling bars will appear, and the HEATING light will
appear.
2. Press START button to select the cooking function. HEATING light will illuminate
and rolling bars will appear indicating that the heating process has started.
3. When the temperature is reached, the PRESSURE light will illuminate, indicating
that pressure is building inside.
4. The countdown timer will begin.
5. When timer reaches 00:00, the appliance will beep 5 times.
The appliance automatically switch to WARM and light indicator will illuminate.
6.
The WARM function can be used for a maximum of 24 hours after the appliance
will automatically shut off.
7. Remove the lid.
8. Unplug the appliance from the electrical outlet. Allow to cool down completely
before cleaning (see Cleaning Instructions).
YOGURT
This function is programmed to prepare yogurt. Place a large cooking pot on the
stovetop and boil milk to at least 180 °F (82 °C). Stir the milk occasionally to prevent
a skin from forming. Allow the milk to cool down between 110 °F to 115 °F
(43 °C to 46 °C). Use a thermometer to monitor the temperature.
1. Pour the milk inside the cooking pot and add your starter (powdered or fresh
yogurt). If using powdered starter, incorporate the mixture inside the cooking pot.
If using fresh yogurt, use a separate bowl to incorporate a small amount of warm
milk and yogurt starter. Add the mixture to the rest of the warm milk and stir.
2. Close the lid a ''click'' is heard then plug the appliance.
3. Select YOGURT function. Appliance will beep, light indicator near the selected
button will blink (standby mode). The default time for this function is 8 hours.
NOTE: In any setting, the time can be adjusted by pressing the ''+'' and ''-''.
Cooking time can be adjusted in increments of 15 minutes. No pressure is used to
prepare yogurt.
NOTE: These presets are for reference only. Actual cooking times may vary.
4. Press START button select the cooking function. As temperature increases, the
animated rolling bars will appear, and the HEATING light will appear.
5. When the temperature is reached, the HEATING light will stay illuminated, no
pressure will build inside the unit in this function.
6. During the countdown the HEATING light will stay on.
7. When the cook time countdown to 00:00, the appliance will beep 5 times.
To avoid over-cooking the food, press the CANCEL button. The light will
8.
disappear, the cooking time display will show 00:00.
9. Remove the lid.
10. Unplug the appliance from the electrical outlet. Allow to cool down completely
before cleaning (see Cleaning Instructions)
18