Activate/deactivate the EASY DOG SOFT or EASY DOG PULSE remote control
Remote control is supplied with battery fi tted.
- Activate: as soon as the battery is in place, the remote control is ready for use.
- Deactivate: to deactivate the remote control you have to remove the battery from its housing.
To increase the battery life of the remote control, we recommend you to deactivate the unit if you are
not using it for a long period.
Activate/deactivate the EASY DOG receiver collar
A magnet located in the EASY DOG SOFT or EASY DOG PULSE remote control is used to switch the receiver
collar On or Off.
- Activate: move the remote control towards the collar so that the round mark on the remote control
comes into contact with the white mark on the receiver collar, hold for 1 second (ref. Diagram 6). The
indicator light on the collar will fl ash in green indicating that the EASY DOG receiver is On.
- Deactivate: move the remote control towards the collar so that the round mark on the remote control
comes into contact with the white mark on the collar, hold for 1 second (ref. Diagram 6). The indicator
light on the collar will fl ash from green to red and then off: the EASY DOG receiver is Off.
To increase the battery life of the receiver collar, we recommend you to deactivate the unit if you are
not using it for a long period.
Gb - 23
Polarity "-"
of the battery
Diagram 5
Polarity "+"
of the battery
Seal