Blackmagic Design UltraStudio 4K Mini Manual De Instalación Y Funcionamiento página 18

Video Playback
‚
Click to select whether to display a freeze frame or black output when not playing.
During Capture
‚
Click to select whether the video output displays the playback video or input video
during capture. If you select the 'video output displays playback video' option, then
your selection in the 'video playback' section will dictate what is displayed on your
output. If you select the 'video output displays input video' option, then the input video
will be displayed on your outputs.
During Playback
‚
Some Desktop Video products are capable of converting Rec. 601 and Rec. 709 video
outputs to Rec. 2020 for TVs and video monitors that may require it. If your Desktop
Video hardware supports this feature, select 'convert to Rec. 2020' in the setup utility.
If your video is already using the Rec. 2020 color space, or is displaying correctly, you
can leave this setting set to 'keep default color gamut'.
Select what to display on the output when paused,
during video playback and during capture
SDI Output
Color Space
‚
Click to select the color space to convert to. Options are 4:4:4 RGB video or Y,
Cb, Cr 4:2:2.
3G-SDI Formats
‚
Click to select whether to output 3Gb/s SDI signals as SMPTE Level A direct mapping
or to have 3Gb/s signals sent with Level B mapping.
1080p HD and 2K
‚
Click to select whether 1080p HD and 2K are output as 1080p progressive video,
or as progressive segmented frame video.
Use the SDI Settings to control the output of your SDI video.
Blackmagic Desktop Video Setup 18