Connecting Via Usb 3.0; Connecting Via Pcie - Blackmagic Design UltraStudio 4K Mini Manual De Instalación Y Funcionamiento

Blackmagic UltraStudio 4K Extreme 3 has two Thunderbolt™ 3 ports and UltraStudio HD Mini
has one Thunderbolt 3 port, for up to 40Gb/s data speeds. When connecting via Thunderbolt 3,
connect your Blackmagic Desktop Video hardware directly to the Thunderbolt 3 port on your
computer using a Thunderbolt 3 cable. Connecting to a Thunderbolt 2 port on your computer
via a Thunderbolt 3 to Thunderbolt 2 adapter is not supported on bus-powered products like
UltraStudio HD Mini.
Make sure your computer is Thunderbolt 3 compatible by looking for the
Thunderbolt icon near its USB-C connector, as shown on the right.

Connecting via USB 3.0

Connect a SuperSpeed USB 3.0 cable into the USB 3.0 port on the unit. Plug the other end of
the cable into your computer's USB 3.0 port.
Connecting a SuperSpeed USB 3.0 cable to Intensity Shuttle

Connecting via PCIe

Blackmagic Design PCIe cards plug into a PCIe slot in your computer. Check the information
printed on your card's box to determine the number of PCIe lanes your card requires.
For example, depending on your PCIe card, it will require a x1, x4 or x8 PCIe slot.
It's worth noting that you can insert PCIe cards into higher capacity slots than they require.
For example, a x4 lane PCIe card can be inserted into a x16 lane PCIe slot, though not the other
way around.
Getting Started 7