Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Place the template in the ceiling
considering the instructions for
ceiling support structures.
16 assembly screws
Attach a second vertical
support set to adjust the
vertical distance.
click !
Attach the assembly to the
support fixed on the ceiling
Assure with screws (16)
Mark with a pencil the hole
locations for screws in the
ceiling.
Insert the plastic gaskets on
each side of the hood.
(rear and front)
Attach the vertical duct cover
supports using 4 screws. Place
each spring using a screw by side.
The lower duct cover shall
be secured to rangehood by
4 screws.
4 wood screws
Fix the upper horizontal
support with 4 wood screws.
Place the Glass Canopy onto
the hood. 2 people are
recommended to do this.
Place upper duct covers
sliding through until spring
sounds "click" . Then verify
1
8 assembly screw
(B)
(A)
16 assembly screws
Attach the vertical supports (inf)
(A) to the hood. Then attach
horizontal support (B) (inf)
2 /side
Place glass brackets using 2
screws by side.
Place lower duct covers
using one plastic bracket at
each vertex. (4 needed)
Publicidad
Capítulos
Tabla de contenido
