Hood Maintenance; Change Lamp Bulbs - ELICA Arietta DKI001MX 36 Guía De Instalación Y Del Usuario

Hood maintenance

Clean with a damp, soapy cloth and dry with a clean cloth. A glass cleaner may also be used.
•
ATTENTION: Do not wet the control panel.
Do not use a steel wool pad; it will scratch the surface.
•
To clean the stainless steel surface, use warm sudsy water, stainless steel cleaner or polish. Always
•
wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless
steel surface.

Change lamp bulbs:

Remove the inner lamp lens cover by inserting a small flat blade screwdriver into each of the three slots
•
and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp assembly).
Wear gloves, do not touch with your bare fingers.
• Grasp the bulb and pull it straight out.
• Replace with 120 volt, 40 watt halogen bulbs with a G9 base.
Replace inner cover by inserting the three retaining tabs into the three slots and pressing them firmly in
•
place.
inner lamp lens cover.
Bulb
Make sure the tabs are inserted into the slots.
Remove the damaged light bulb and replace it
with a new bulb rated 120 V, max 40 W, G9 base.
22
Outer trim ring
(lamp assembly)
Do not remove
Removable inner
lamp lens cover