List Of Materials; Parts Included In Your Hood; Optional Accessories; Materials Required - ELICA Arietta DKI001MX 36 Guía De Instalación Y Del Usuario

Parts included in your hood

•
Hood structure assembly with blower, transition.
•
2 Lamps already installed.
•
1 Grease filter
• 4 Duct covers.
•
Hardware bag with:
o Ceiling Mount Template
Use, care and installation guide
o
Wood screws (4 pieces - 3/16" x 1" 3/4)
o
Glass Brackets, Springs, Gaskets ( 2 each )
o
Assembly screws (70 pieces)
o
o 4 Plastic Springs
o Duct cover brackets (4 each)
•
8 Vertical supports.
•
2 Upper Ductcover supports.
•
2 Horizontal supports.
•
Glass canopy

Optional accessories

•
Re circulation KIT
•
Non return valve

materials required

•
Duct tape
•
Wire nuts
•
Tape to mount template
•
8" rounded metal duct (lenght to suit installation)
TOOLS REQUIRED FOR INSTALATION
Measuring tape
Knife
Spirit level
Wire cutter/stripper
Pliers
Safety glasses
Duct tape
Masking tape
CHECK INSTALLATION HARDWARE
Locate the hardware accesories box packed
with the hood
Drill 3/16"
Pilot Holes
Approx. 1 1/2"
Deep
10 1/4" to
Centerline
of Holes
8 1/4" to
Centerline
of Holes
36" Hood
Template
Cut a 1 Dia. Wire Access
Hole
FRONT OF HOOD
DUCTLESS CONVERSION KIT
Accesory not included in the hood
Wire nuts
Electric drill with
5/16" and 3/8" Bits
Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
Hammer
8
4 Wood screws
70 Assembly screws
4 Duct cover brackets
2 Springs
2 Gaskets
2 Glass Bracket
Cut a 1 Dia. Wire Access
Hole
Drill 3/16" 1 Ceiling mount template
Pilot Holes
Approx. 1 1/2"
Deep
8 1/4" to
Centerline
of Holes
Air deflector
Charcoal filter
4 springs
Gloves
Strain relief
8 round metal duct,
length to suit installation
Saw, jig saw or
reciprocating saw