Further Safety Instructions For All Saws; Kickback Causes And Related Warnings - Dexter 20VCIS3-190BL.1 Manual De Instrucciones

FR FR
2. SAFETY INSTRUCTIONS
ES ES
metal parts of the power tool «live» and could give the operator an
PT PT
electric shock.
F. When ripping, always use a rip fence or straight edge guide. This
IT IT
improves the accuracy of cut and reduces the chance of blade binding.
EL EL G. Always use blades with correct size and shape (diamond versus
round) of arbour holes. Blades that do not match the mounting
PL PL
hardware of the saw will run off-centre, causing loss of control.
H. Never use damaged or incorrect blade washers or bolt. The blade
RU RU
washers and bolt were specially designed for your saw, for optimum
performance and safety of operation.
UA KZ
KZ UA

KICKBACK CAUSES AND RELATED WARNINGS

RO RO
. Kickback is a sudden reaction to a pinched, jammed or misaligned saw
BR BR
blade, causing an uncontrolled saw to lift up and out of the workpiece
toward the operator;
EN
EN
. When the blade is pinched or jammed tightly by the kerf closing down,
the blade stalls and the motor reaction drives the unit rapidly back
toward the operator;
. If the blade becomes twisted or misaligned in the cut, the teeth at the
back edge of the blade can dig into the top surface of the wood causing
the blade to climb out of the kerf and jump back toward the operator.
KICKBACK IS THE RESULT OF SAW MISUSE AND/OR INCORRECT
OPERATING PROCEDURES OR CONDITIONS AND CAN BE AVOIDED
BY TAKING PROPER PRECAUTIONS AS GIVEN BELOW.
A. Maintain a firm grip with both hands on the saw and position
your arms to resist kickback forces. Position your body to either
side of the blade, but not in line with the blade. Kickback could
cause the saw to jump backwards, but kickback forces can be controlled
by the operator, if proper precautions are taken.
370

FURTHER SAFETY INSTRUCTIONS FOR ALL SAWS