Dexter 20VCIS3-190BL.1 Manual De Instrucciones página 374

FR FR
2. SAFETY INSTRUCTIONS
ES ES
PT PT
IT IT
EL EL
The laser guide used in the tool is Class II with maximum output 1mW and
wavelength 650nm.The laser guide do not normally present an optical
PL PL
hazard, although staring at the beam may cause flash blindness.
CAUTION: The use of capital instruments with laser product will increase
RU RU
eye hazard.
UA KZ
. Do not stare your eyes to the laser beam.
. The laser shall be used and maintained in accordance with the
KZ UA
manufacture 's instructoion.
. Never aim the beam at any person or an object other than the work piece.
RO RO
. Always ensure the laser beam is aimed at a sturdy work piece without
reflective surface. I.e. wood or rough coated surface are acceptable.
BR BR
Bright shiny reflective sheet or the like is not suitable for laser use as the
reflective surface could direct te beam back at the operator.
EN
EN
. Do not change the laser light assembly with a different type. Any repairs
must only be carried out by the laser manufacture or authorized service
agent.
. Do not attempt to repairs the laser guide by yourself.
. Do not attempt to change any parts of the laser guide.
. Always switch off the laser when not used.
374
LASER
2
λ=650nm P ≤1mW EN60825-1:2014
o