Pumping; Device Operation - Medela Swing Instrucciones De Uso

Ocultar thumbs Ver también para Swing:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Pumping

Caution
• Always inspect breastshield,
connector, white membrane, yellow
valve, and tube prior to use for
cleanliness. If dirty, see Section 1.2.
• If you experience pain while pumping
seek advice from your healthcare
professional or breastfeeding
specialist. See Section 6 for more
information.
• Do not try and express with vacuum
that is too high and uncomfortable
(painful). The pain, along with
potential breast and nipple trauma,
may decrease milk output.
• Make sure tube is not kinked or
pinched while pumping.
• Contact your healthcare professional
or breastfeeding specialist if you can
express only minimal or no milk or if
expression is painful.
Info
• Research has shown that you will
pump more efficiently – get more
milk in less time – when pumping at
Maximum Comfort Vacuum during
the Expression Phase.
• You should reassess your Maximum
Comfort Vacuum throughout your
pumping experience because it can
change during the different stages of
lactation.
• Do not tilt or overfill containers when
pumping.
• Do not kink tubing.
22

3.1 Device Operation

1
Wash hands before touching
breastpump, kit and breasts
and avoid touching the inside
of containers or lids.
4
Switch on the breastpump with
. Your pumping session will
start in the Stimulation Phase.
Overview of LEDs
lights up
does not light up
even, regular flashing
light constantly on
rapid flashing
On
Off
Stimulation phase
Expression phase
Min./Max. vacuum

Publicidad

Tabla de contenido
loading

Tabla de contenido