Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A. INSTRUCTIONS FOR THE USER
1. WARNING
ATTENTION: Carefully read this instruction manual as it provides important information on the safe installation, operation
and maintenance of your Unox appliance.
Keep the manual in a safe place for future reference.
The appliance must be used only for the purpose it was expressly intended. Any other use is to be considered improper.
The appliance has been intended only for the washing of the cooking chamber of the ovens in the ChefTop™ line.
The appliance is intended for professional use and must by used only by qualified personnel.
Do not install the appliance close to external heat sources e.g.: fryers, open burners etc.
Use the washing system at a room temperature between +5 °C and +35 °C.
Installation, maintenance and repair must be carried out by UNOX qualified and properly trained personnel. Before carrying
out work on the appliance, the electrical supply to the appliance must be disconnected.
In the event of the appliance being installed on a mobile support, ensure that the allowed movement is sufficient as to not cause
damage to electrical cables, water pipes, drain pipes, etc.
In this type of installation, restraining cables must be fitted.
2. WASHING SYSTEM CLEANING
2.1 WARNING
Before commencing any maintenance or cleaning operation it is necessary to disconnect the electrical supply and wait for the
appliance to cool down.
2.2 WASHING SYSTEM EXTERNAL CLEANING
Never use pressure washers or excessive water to clean the external part of the oven.
The use of wet cloths is sufficient.
3. WASHING SYSTEM FUNCTIONING
The washing system functioning is completely automatic: it is necessary to simply select the required washing program.
The "ChefTouch" control board is already set with three washing programs: L1 (short), L2 (medium), L3 (long), plus the
1
2
UNO X
R
3
4
ENGLISH
ENGLISH
3 2
2
Publicidad
Capítulos
Tabla de contenido
