Instructions For The Installer; Warning; Preliminary Operations; Installation Site - Unox ChefTop XC404 Manual De Instrucciones

ChefTop™ ChefTop™
B. INSTRUCTION FOR THE
INSTALLER

1. WARNING

All the operations of installation, assembly, service and
assistance must be carried out by qualified personnel ac-
cording to current laws and regulations.
Please read carefully the instruction manual before the
installation and commissioning of the appliance.
The appliance must be unaltered (check for any transport
damage).

2. PRELIMINARY OPERATIONS

2.1 INSTALLATION SITE

Before placing the appliance, please verify the overall di-
mensions and the exact position of the electrical and wa-
ter connections and of the fumes exhaust as indicated on
the attached file "Technical Data".

2.2 REMOVAL OF THE PROTECTIVE FILM

Carefully remove all the protective film from the external
walls of the appliance.
Pay attention not to leave any residue of glue. If there
should be any residue of glue, please remove it with an
appropriate solvent.

3. WASHING SYSTEM BOX ASSEMBLY

To assemble the washing system box on the oven pro-
ceed as follows:
• Remove the pre-cut panel from the back of the oven
(see picture)
• Insert the proper fairlead
• Remove the back panel of the oven
• Insert the electric cable
• Fix the washing system box on the back of the oven
with the 4 self-threading screws provided (see pic-
ture)
• Connect the electric cable of the washing system box
to the correct connector on the oven power card
(see picture)
• Replace the back panel of the oven
• Connect the water pipe of the washing system box
to the inlet on the bottom right of the oven (see back
view of the oven)
ENGLISH
5
ENGLISH