Positioning The Stand Assist Lift - Invacare Stand Assist Manual Del Usuario

Ocultar thumbs Ver también para Stand Assist:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 95
Invacare® Stand Assist

5.2 Positioning the Stand Assist Lift

Refer to the Safety section in this manual and
review the information in 5.1 Safe Lifting, page 24
before proceeding further and observe all warnings
indicated.
Before positioning the legs of the patient lift under
a bed, make sure that the area is clear of any
obstructions.
WARNING!
Risk of Injury
The lift could tip and endanger the patient and
assistants.
– The legs of the lift must be in the maximum
open position for optimum stability and safety.
If it is necessary to close the legs of the lift to
maneuver the lift under a bed, close the legs
of the lift only as long as it takes to position
the lift over the patient and lift the patient off
the surface of the bed. When the legs of the
lift are no longer under the bed, return the
legs of the lift to the maximum open position.
26
A UP Button
1. Ensure the legs of the stand assist lift are in the
maximum open position. If not, use the shifter handle
to open the legs.
2. Position the stand assist lift using the mast handle.
3. Press the down arrow button on the hand control to
lower the lift arms for easy attachment to the sling.
B DOWN Button
1078985-I

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rps350-1eRps350-1fr

Tabla de contenido